8.2.2. Sterling Single Conveyor Unit with 24
The power consumption amounts to approx. 15 watt.
The operating voltage amounts to approx. 24 V.
Install the cable (2 x 0.75 mm², 30 cm long) from the solenoid valve of the pneumatic cylinder in the control system (please follow the connection diagram).
Install the cable (3 x 0.75 mm², 1.8 m long) from the control system of the
Or, if it is not long enough, install and mount a cable (at least 3 x 1 mm²) from the single conveyor unit to the
Follow the operating manual of the single conveyor unit.
8.2.3. Connection to a conveyance control system
»
The electrical connection to a conveyance control system may only be made by skilled personnel authorized by Sterling.
Other persons are not permitted to install electrical connections.
Installation instructions