SKW-E
8.1. Installation
Installation is possible in any position.
The control system can be installed on the base plate or in a maximum distance of 3 m (9.84 ft.) from the unit. The control unit must be accessible at any time.
Install the
Please note that the maximum ambient temperature near the
Remove the plugs from the pipe bends.
Install the regrind line at intake port 1 (A).
Install the virgin material line at intake port 2 (B).
Install the feed line to the hopper loader at the outlet port (C).
Align both suction pipes nearly equally in order to avoid inaccurate percentage preselection re- sults.
A
B
C
Installation instructions