![SKW-E](/images/new-backgrounds/34362/3436231x1.webp)
SKW-E
3.1. Adjusting the conveying ratio
Adjust the conveying ratio according to your specific requirements.
Version 1
By means of the arrow key, set the percentage of component 1 (= regrind).
Example
Desired conveying ratio: 40 % regrind and 60 % raw material.
Press the arrow key until “40" appears on the display.
F
When conveying poorly flowing components, set higher values.
Version 2 (optional)
Set the percentage of component 1 (= regrind) by means of the control system of the conveying control.
Observe the operating manual of the conveying control.