English
Mounting the Bar and Chain
Releasing the chain brake
4
142BA057 KN
Mounting the guide bar
7
8 | KN | |
142BA059 | ||
|
NTurn the screw (7) counterclockwise until the tensioner slide (8) butts against left end of housing slot.
11
142BA061 KN
NFit chain around the sprocket (11) and over the guide bar – cutting edges on top of bar must point to bar nose.
NPull the hand guard (4) toward the control handle until there is an audibleclick – the chain is disengaged.
Removing the chain sprocket cover
6
5 | KN | |
142BA058 | ||
|
9
10 | KN | |
142BA060 | ||
|
NFit the guide bar over the stud (9) and engage the peg of the tensioner slide in the locating hole (10).
Fitting the chain
7 | KN | |
142BA062 | ||
|
NTurn the tensioning screw (7) clockwise until there is very little chain sag on the underside of the bar – and the drive link tangs are engaged in the bar groove.
NUnscrew the nut (5) and remove the cover (6).
Wear work gloves to protect your hands from the sharp cutters.
20 | MS 192 T, MS 192 TC |