STIHL MS 192 T Starting / Stopping the, Engine, Information Before You Start

English

Information Before You Start	Starting / Stopping the
	Engine

If the engine is cold

The three positions of the Master	Starting the engine
Control lever:

STOP

151BA006 KN

Stop 0 – engine off – the ignition is switched off.

Normal run position F– engine runs or can fire.

To move the Master Control lever from F to n, press down the throttle trigger lockout and squeeze the throttle trigger at the same time.

Starting throttle position n– this position is used to start a warm engine. The Master Control lever moves to the normal run position as soon as the throttle trigger is squeezed.

NObserve safety precautions.

NPress the fuel pump bulb at least five times – even if the bulb is already filled with fuel.

NPush the hand guard (1) forward – the chain is locked.

NPress down the throttle trigger lockout (2) and squeeze the throttle trigger (3) at the same time – hold both levers in that position.

NMove the Master Control lever (4) to nand hold it there.

NNow release the throttle trigger, Master Control and trigger lockout in that order. This is the starting throttle position.

NSet the choke lever (5) to l.

If the engine is warm

NSet the choke lever (5) to j . Also use this position if the engine has been running but is still cold.

MS 192 T, MS 192 TC 27