Fueling

Preparations

Opening

001BA218 KN

NRaise the grip into an upright position.

English

Closing

001BA220 KN

With grip in an upright position:

NInsert the cap – positioning marks on the cap and the fuel tank opening must line up.

NThe cap should drop fully into the opening in this position.

NBefore fueling, clean the filler cap and the area around it to ensure that no dirt falls into the tank.

Always thoroughly shake the mixture in the canister before fueling your machine.

NPosition the machine so that the filler cap is facing up.

In order to reduce the risk of fire and personal injury from escaping gas vapor and fumes, remove the fuel filler cap carefully so as to allow any pressure build-up in the tank to release slowly.

001BA219 KN

NTurn the cap counterclockwise (approx. 1/4 turn).

001BA224 KN

NRemove fuel filler cap.

Refueling

Take care not to spill fuel while fueling and do not overfill the tank.

001BA221 KN

NWhile pressing the cap down, twist it firmly clockwise as far as it will go (approx. 1/4 turn).

001BA222 KN

NFold down the grip.

MS 192 T, MS 192 TC

23