English
001BA237 KN
NRemove the filler cap.
Refueling
Take care not to spill fuel while fueling and do not overfill the tank – leave approx. 1/2" (13 mm) air space.
Closing
001BA234 KN
Handle is in an upright position:
NPosition filler cap – markings on filler cap and housing must align.
NPush the filler cap down as far as it will go.
001BA233 KN
NPush the filler cap down and twist it clockwise until it engages.
001BA231 KN
Then the markings on filler cap and housing will align.
001BA235 KN
NFlip the handle down.
001BA241 KN
Filler cap is now closed.
If the filler cap will not engage into the tank housing
The base of the filler cap is rotated in relation to the upper part.
NLook at the black alignment marks on the top of the filler cap.
| 1 |
| 001BA238 KN |
Left: | Base of filler cap is rotated – |
| interior marking (1) is aligned |
| with the exterior marking. |
Right: | Base of filler cap is in the cor- |
| rect position – interior |
| marking is below the clip. It |
| does not align with the exte- |
| rior marking. |
30 | MS 250 |
