English
Air Filter System
The air filter system can be adapted to suit different operating conditions by installing a choice of filters. Changing the filter is quick and simple.
The saw comes standard with either a fabric filter or a fleece filter.
208BA001 KN
Fabric filter
Cleaning the Air Filter
If there is a noticeable loss of engine power
NPress down the throttle trigger lockout and move the Master Control lever to choke closed l.
208BA005 KN
NTurn the knob 90° to the left.
NLift off the carburetor box cover vertically.
NAlways replace damaged filters.
NClean away loose dirt from around the filter.
NOTICE
To avoid damaging the filter, do not use tools for removing and installing the air filter.
NBlow out the filter with compressed air from the clean air side.
If the filter fabric is caked with dirt or no compressed air is available:
NWash the filter in a clean, non- flammable solution (e.g. warm soapy water) and then dry.
NReinstall the air filter.
For normal operating conditions and winter operation.
Fleece filter
For dry and very dusty work areas.
1
135BA035 KN
NPlace fingers behind the air filter (1), press thumbs against the housing and swing the filter in direction of rear handle.
40 | MS 250 |
