Manual fuel pump
Press the manual fuel pump bulb several times – even if the bulb is already filled with fuel:
–When starting for the first time.
–if the fuel tank was run until empty (engine stopped).
Holding the Saw
There are two ways of holding the saw when starting.
On the ground
143BA018 KN |
NPlace your saw on the ground. Make sure you have a firm footing – check that the chain is not touching any object or the ground.
NHold the saw firmly on the ground with your left hand on the front handle – your thumb should be under the handle.
NPut your right foot into the rear handle and press down.
English
Between knees or thighs
143BA019 KN
NHold the rear handle tightly between your legs, just above the knees.
NHold the front handle firmly with your left hand – your thumb should be under the handle.
MS 250 | 35 |
