WARNING
Some STIHL chain saws are equipped with a cata- lytic converter, which is designed to reduce the exhaust emissions of the engine by a chemical process in the muffler. Due to this process, the muffler does not cool down as rapidly as con- ventional mufflers when the engine returns to idle or is shut off. To reduce the risk of fire and burn injuries when using a cat- alytic converter, always set your chain saw down in the upright position and never locate it where the muffler is near dry brush, grass, wood chips or other combustible materi- als while it is still hot.
DANGER
Do not rely on the chain saw ’s insulation against electric shock. To reduce the risk of electrocution, never operate this chain saw in the vicinity of any wires or cables (power, etc.) which may be carry- ing electric current.To reduce risk of electrocu- tion, take extra precautions when cutting near power lines. Have the power switched off before starting cutting work in the immediate vicinity of power lines.
MAINTENANCE, REPAIR AND STORING
Maintenance, replacement, or repair of the emission control devices and systems may be performed by any nonroad engine repair establishment or individual. However, if you make a warranty claim for a component which has not been serviced or maintained properly or if nonapproved replacement parts were used, STIHL may deny coverage.
WARNING
Use only identical STIHL replacement parts for maintenance and repair. Use of
English
Strictly follow the maintenance and repair instructions in the appropriate section of your instruction manual.
Please refer to the maintenance chart in this manual.
WARNING
Always stop the engine and make sure that the cutting tool is stopped before doing any maintenance or repair work or cleaning the power tool.
WARNING
Do not attempt any maintenance or repair work not described in your instruction manual. Have such work performed by your STIHL servicing dealer only. For example, if improper tools are used to remove the flywheel or if an improper tool is used to hold the flywheel in order to remove the clutch, structural damage to the flywheel could occur and could subsequently cause the flywheel to burst.
Wear gloves when handling or performing maintenance on saw chains.
WARNING
Use the specified spark plug and make sure it and the ignition lead are always clean and in good condition. Always press spark plug boot snugly onto spark plug terminal of the proper size. (Note: If terminal has detachable SAE adapter nut, it must be securely attached.) A loose connection between spark plug terminal and the ignition wire connector in the boot may create arcing that could ignite combustible fumes and cause a fire.
MS 250 | 13 |
