INSTALLATION INSTRUCTIONS
3.3Take care when handling, as bricks can become fragile after use. Life span depends on the type of fuels burnt and the level of use.
•Replace damaged bricks as soon as possible
3.4To remove bricks:
•Lift Baffle and pull as far forward as possible
•Pull base of side brick towards centre of stove
•Remove brick
•Repeat with other side
•Replace in reverse order
| 4. FITTING & REMOVAL OF BAFFLE |
| (BRUNEL 1A ONLY) |
4.1 | The appliance is fitted with a baffle in the top of the firebox |
| to maintain efficient combustion. |
4.2 | Allow the appliance to cool fully before removing baffle |
| system. |
4.3 | Remove the Log Guard from the appliance to give access to |
| the firebox. |
4.4 | To remove baffle: |
| • Lift Baffle and pull as far forward as possible |
| • Remove side brick, see above |
| • Remove baffle |
| • Replace in reverse order |
4.5 | Remove and clean the Baffle System to clear the flue ways |
Moving
Centre Grate
Stationary
Grate
AR2146
• Lift the moving grate parts, see picture 6
Moving Grate
Stationary Grate
Riddling Arm
AR2148
•Clean parts
•Replace parts ensuring that the riddling arm is relocated in the moving grate, see picture 6 and 7
| of soot and debris . This ensures the safe, efficient operation |
| of the appliance. The frequency of cleaning will depend on |
| the stove operating conditions. |
4.6 | Replace any damaged baffles immediately. |
4.7 | Do not modify the baffle system. |
5. FITTING AND REMOVAL OF
THE RIDDLING MECHANISM (Multi-fuel only)
5.1The Riddling Mechanism can be removed for cleaning to maintain good working condition.
To remove Riddling Mechanism:
• Remove the Log Guard from the appliance to give access to the firebox
Riddling Arm
Moving
Centre Grate
PR7207a
21
