Subaru RGD3300H, RGD5000H 3. FULL POWER SWITCH, 4. STOPPING THE GENERATOR, TABLE, ENGLISH, CAUTION, ESPAÑOL, CAUTION, FRANÇAISE, Switch position, Lower Voltage Receptacle

1 43

ENGLISH

Select the voltage using the FULL POWER SWITCH in accordance with the electrical appliance.

Refer to TABLE 2.

CAUTION

120V

120V 240V

FRANÇAISE

NOTE

Voltmeter always indicates the lower voltage whichever the FULL POWER SWITCH is set.

Switch position	Lower Voltage Receptacle	Higher Voltage Receptacle

120V	Activated full rated output	N.A

120/240V	Activated half of rated output	Activated full rated output

TABLE 2

ESPAÑOL

(a)Turn off the power switch of the electric equipment and unplug the cord from receptacle of the generator.

(b)Allow the engine about 3 minutes to cool down at no load before stopping.

(c)Move the speed adjustment lever back to the STOP position. The engine cuts out. (See Fig. 4-y)

q SPEED ADJUSTER w STOP position

CAUTION

Contents

Page Page Page Page Page DANGER WARNING: Page Page Page Page Page Page Page Page Page Page FOREWORD CONTENTS NOTE SAFETY PRECAUTIONS Page Symbols and Meanings P r COP COS r f r U r COMPONENTS (See Fig. 1) PRE-OPERATIONCHECKS (See Fig. 2) 1. CHECK ENGINE OIL 3. CHECKING COMPONENT PARTS 4.CHECK GENERATOR SURROUNDINGS 5.GROUNDING THE GENERATOR 6. BATTERY INSTALLATION OPERATING PROCEDURES (See Fig. 3,4) 1. STARTING THE GENERATOR Follow the starting procedures described below, without fail Repeat the "(a) Before starting 2. USING ELECTRIC POWER (1) AC APPLICATION (See Fig. 4-q,w) (2) DC APPLICATION (See Fig. 4-r) CONNECTION OF CABLE : SAFETY PRECAUTIONS WHILE CHARGING FUSE REPLACEMENT (See Fig. 4-t) 3. FULL POWER SWITCH 4. STOPPING THE GENERATOR WATTAGE INFORMATION VOLTAGE DROP IN ELECTRIC EXTENSION CORDS MAINTENANCE DAILY INSPECTION PERIODIC MAINTENANCE Maintenance chart (ENGINE) Maintenance chart (GENERATOR) 1.CHECK ENGINE OIL LEVEL (See Fig. 2-e) 2.CHECK COMBUSTION AND COOLING AIR INTAKE (See Fig. 5-q) 3. ENGINE OIL CHANGE (See Fig. 5-w) (See Fig. 5-e thru u) 5. COOLING AIR AREA 6. CHECKING SCREW CONNECTIONS 9.DRY-TYPEAIR CLEANER (See Fig. 5-e, !2thru !3) 10. OIL FILTER (See Fig. 5-!4thru !8) PERIODIC OPERATION AND INSPECTION TRANSPORTING PREPARATION FOR STORAGE TROUBLESHOOTING Engine Page When No Electricity Is Generated at Receptacle: SPECIFICATIONS WIRING DIAGRAM RGD3300H (60Hz-120/240V) RGD5000H (60Hz-120/240V) ISSUE EMD-GU2359