Subaru RGD3300H, RGD5000H Maintenance chart (GENERATOR)

ENGLISH

FRANÇAISE

Maintenance interval

Maintenance work required

Every 8

Clean generator and check bolt and nuts

operating hours,

Check AC receptacles

or before each

Check DC termianl

daily start-up

1000

Every 1000

Check rotor

Check stator

operating hours

Replace engine mount

ESPAÑOL

On new or reconditioned engines, after the first 25 operating hours, always

■Change engine oil

■Examine screw connections, Do not tighten the cylinder head fastening.

If the engine is not used frequently, change the engine oil after 12 months at the latest, regard-less of

the actual number of hours it has been in operation.

Contents

Page Page Page Page Page DANGER WARNING: Page Page Page Page Page Page Page Page Page Page FOREWORD CONTENTS NOTE SAFETY PRECAUTIONS Page Symbols and Meanings P r COP COS r f r U r COMPONENTS (See Fig. 1) PRE-OPERATIONCHECKS (See Fig. 2) 1. CHECK ENGINE OIL 3. CHECKING COMPONENT PARTS 4.CHECK GENERATOR SURROUNDINGS 5.GROUNDING THE GENERATOR 6. BATTERY INSTALLATION OPERATING PROCEDURES (See Fig. 3,4) 1. STARTING THE GENERATOR Follow the starting procedures described below, without fail Repeat the "(a) Before starting 2. USING ELECTRIC POWER (1) AC APPLICATION (See Fig. 4-q,w) (2) DC APPLICATION (See Fig. 4-r) CONNECTION OF CABLE : SAFETY PRECAUTIONS WHILE CHARGING FUSE REPLACEMENT (See Fig. 4-t) 3. FULL POWER SWITCH 4. STOPPING THE GENERATOR WATTAGE INFORMATION VOLTAGE DROP IN ELECTRIC EXTENSION CORDS MAINTENANCE DAILY INSPECTION PERIODIC MAINTENANCE Maintenance chart (ENGINE) Maintenance chart (GENERATOR) 1.CHECK ENGINE OIL LEVEL (See Fig. 2-e) 2.CHECK COMBUSTION AND COOLING AIR INTAKE (See Fig. 5-q) 3. ENGINE OIL CHANGE (See Fig. 5-w) (See Fig. 5-e thru u) 5. COOLING AIR AREA 6. CHECKING SCREW CONNECTIONS 9.DRY-TYPEAIR CLEANER (See Fig. 5-e, !2thru !3) 10. OIL FILTER (See Fig. 5-!4thru !8) PERIODIC OPERATION AND INSPECTION TRANSPORTING PREPARATION FOR STORAGE TROUBLESHOOTING Engine Page When No Electricity Is Generated at Receptacle: SPECIFICATIONS WIRING DIAGRAM RGD3300H (60Hz-120/240V) RGD5000H (60Hz-120/240V) ISSUE EMD-GU2359