Summit 56214 manual Side Burner Troubleshooting, Grill Out Handle Light Troubleshooting

SIDE BURNER TROUBLESHOOTING

PROBLEM	CHECK	SOLUTION
Side Burner does not light.	Is gas supply off?	Turn gas supply on..
	The excess flow safety device, which is part of the	To reset the excess flow safety device turn all burner
	barbecue to cylinder connection, may have activated..	control knobs and the cylinder valve off.. Disconnect the
		regulator from the cylinder.. Turn burner control knobs to
		START/HI.. Wait at least one minute.. Turn burner control
		knobs to OFF.. Reconnect the regulator to the cylinder..
		Turn cylinder valve on slowly.. Refer to “SIDE BURNER
		IGNITION”..
Flame is low in HI position.	Is the fuel hose bent or kinked?	Straighten hose..
Push button ignition does not work.	Does burner light with a match?	If match lights burner, check igniter.. Refer to “SIDE
		BURNER MAINTENANCE”..

If problems cannot be corrected by using these methods, please contact the Customer Service Representative in your area using the contact information on our web site. Log onto www.weber.com®.

GRILL OUT™ HANDLE LIGHT TROUBLESHOOTING

PROBLEM	CHECK	SOLUTION
Weber Grill Out™ Handle Light does not light.	Are the batteries old?	Replace batteries..
	Are the batteries installed correctly?	Refer to assembly illustration..
	Is the lid in the up position with the power button ON?	Light will activate when lid is open..
	Is the Weber® Grill Out™ Handle Light activated?	Press the power button..
	Is the Weber® Grill Out™ Handle Light positioned	Adjust position. Refer to assembly illustration.
	correctly on the handle?

If problems cannot be corrected by using these methods, please contact the Customer Service Representative in your area using the contact information on our web site. Log onto www.weber.com®.

www.weber.com® 23