Sunbeam EM6200 manual Descaling continued

Descaling (continued)

10.Leave the machine off for 10-15 minutes to allow the descaling solution to take affect.

11.Press the ‘POWER’ button once to turn the espresso machine on.

12.Press the ‘MANUAL’ button and allow the remaining solution to cycle through the group head. Press button again to stop.

13.Remove the water reservoir from the machine and rinse thoroughly under running water, ensuring that all traces of the descaling solution are removed. Fill with clean water and replace the reservoir.

14.Press the ‘MANUAL’ button and allow the entire water reservoir to cycle through the group head. Press button again to stop.

Note: Depending on the size of the container under the group head on occasion this may need to be emptied throughout this process.

15.When this is finished remove the container under the group head and give the machine a good wipe over.

16.Carefully replace the rubber seal, brewing filter/shower screen and washer to the group head.

Important: Ensure the screw is tightened well.

17.Fill the water reservoir with fresh water and position it in to the machine.

29