Sunbeam EM6200 manual Hot Water, Using the control panel continued

Using the control panel (continued)

Note: After 10 minutes of inactivity in the steam mode, the espresso machine will automatically switch back to the ‘READY MODE’.

Hot Water

The hot water function allows the coffee maker to release a controlled flow of hot water for making long blacks, hot chocolates, pre-heating cups and glasses and brewing teas.

To activate the hot water function, the coffee maker simply needs to press the ‘HOT WATER’ button.

Note: When the coffee maker has activated the hot water function the light around the ‘HOT WATER’ button will show a constant red light and the light behind the ‘MANUAL’, ‘SINGLE’ and ‘DOUBLE’ buttons will go off. Additionally the light on the ‘POWER’ button will remain on.

The coffee maker simply needs to turn the steam and hot water control dial anti- clockwise to the ‘MAX’ setting to start and turn it back to the ‘OFF’ position to stop.

Press the ‘HOT WATER’ button again to deactivate the hot water function.

Note: When you have finished using the hot water, ensure the steam and hot water dial is fully turned off. If the steam and hot water dial is left open, the coffee maker will not be able to switch to the ‘COFFEE’ or ‘STEAM’ functions.

11