Advanced programming options
Espresso Thermoblock Temperature
The water temperature of this espresso machine has been calibrated to the precise temperature of 92°C at the group head. The temperature of the water at the group head can be modified in increments of 2°C up and down should it be desired.
To do this you need to follow the instructions below:
1.Insert the power cord into a
Note: Although the espresso machine is ON at the power outlet ensure that the actual espresso machine power is ‘OFF’. Therefore no lights will be illuminated on the espresso machine control panel.
2.Press and hold down the ‘MANUAL’ button.
3.While still holding down the ‘MANUAL’ button briefly press the ‘POWER’ button and release all buttons.
Note: A series of beeps will indicate the current setting.
Note: The ‘MANUAL’ button LED will light up as will the ‘SINGLE’ and ‘DOUBLE’ buttons.
Note: The sequence of beeps will indicate the current setting.
4.Press the ‘SINGLE’ button to decrease the Espresso temperature setting or press the ‘DOUBLE’ button to increase the espresso temperature setting. Please refer to the chart below.
Espresso Temperature Programming
Setting | Beep Sequence | |
|
|
|
+3 | 3 | Short Beeps |
|
|
|
+2 | 2 | Short Beeps |
|
|
|
+1 | 1 | Short Beep |
|
|
|
0 (Factory Setting) | 1 | Short Beep and 1 Long Beep |
|
|
|
1 | Long Beep | |
|
|
|
2 | Long Beeps | |
|
|
|
3 | Long Beeps | |
|
|
|
5.Once you have selected the desired temperature, press and hold the ‘MANUAL’ button to save the new setting. A single long beep will sound to indicate the new setting has been saved. The espresso machine will then turn on to ‘READY MODE’.
Remember: If you do not press the ‘MANUAL’ button within 30 seconds the program will return to the Factory Setting and the espresso machine will then power on and begin heating up.
30
