Sunbeam EM6200 manual Using the control panel continued, Double Espresso

Models: EM6200

1 40
Download 40 pages 6.05 Kb
Page 11
Image 11
Using the control panel (continued)

Using the control panel (continued)

operation. The coffee maker simply needs to press the ‘SINGLE’ espresso button once to start and the pour of liquid espresso will stop automatically.

Important: Once the ‘SINGLE’ espresso operation is activated, before the espresso pour starts the pre-infusion feature will release three short bursts of gradually increasing water pressure onto the coffee cake. After this the full water pressure is applied and the espresso will pour freely.

Note: When the coffee maker has activated the ‘SINGLE’ espresso operation the lights around the ‘MANUAL’ and ‘DOUBLE’ espresso buttons will go off. The lights on the ‘POWER’ and the ‘SINGLE’ espresso buttons will remain on.

Note: The coffee maker does not need to press the single espresso button again to end the pour as the espresso machine will stop automatically.

Once the pour of liquid espresso stops the espresso machine is ready to make another espresso.

Note: When using the single espresso operation you can stop the pour of espresso at any time by pressing the ‘MANUAL’, ‘SINGLE’, or ‘DOUBLE’ espresso operation buttons.

Double Espresso

Note: Before activating the espresso coffee function, ensure that the STEAM and HOT WATER control dial is in the OFF position.

The ‘DOUBLE’ espresso function removes the guesswork and is programmed to pour 60mls of liquid espresso.

Tip: We recommend using the double cup filter when using the programmed ‘DOUBLE’ espresso operation.

Once the espresso machine is switched on and heated, so the light on the ‘POWER’ button is red and the lights around the ‘MANUAL’, ‘SINGLE’, and ‘DOUBLE’ espresso buttons show a constant red light, the coffee maker is able to use the ‘DOUBLE’ espresso operation. The coffee maker simply needs to press the ‘DOUBLE’ espresso button once to start and the pour of liquid espresso will stop automatically.

Important: Once the ‘DOUBLE’ espresso operation is activated, before the espresso pour starts the pre-infusion feature will release three short bursts of gradually increasing water pressure onto the coffee cake. After this the full water pressure is applied and the espresso will pour freely.

Note: When the coffee maker has activated the ‘DOUBLE’ espresso operation the lights around the ‘MANUAL’ and ‘SINGLE’ buttons will go off. The lights on the ‘POWER’ and ‘DOUBLE’ espresso buttons will remain on.

Note: The coffee maker does not need to press the ‘DOUBLE’ espresso button again to end the pour as the espresso machine will stop automatically.

Once the pour of liquid espresso stops the espresso machine is ready to make another espresso.

Note: When using the ‘DOUBLE’ espresso operation you can stop the pour of espresso at any time by pressing the ‘MANUAL’, ‘SINGLE’ or ‘DOUBLE’ espresso operation buttons.

9

Page 11
Image 11
Sunbeam EM6200 manual Using the control panel continued, Double Espresso