Assembling your Slow Juicer
Before Use
After unpacking your slow juicer, we recommend that you disassemble the unit before using for the first time. Wash all parts except the motor base in hot soapy water. Rinse and dry immediately.
Important: Always ensure your slow juicer is unplugged from the power outlet when not in use, during assembly or whilst removing parts.
1.Set the motor base on a dry, level surface and place the juicing bowl onto the top of the motor base. Rotate clockwise and lock into place – figure 1.
2.Place the juicing screw into the centre of the juicing bowl and push down until firmly in place – figure 2.
Figure 2
3.Place the filter basket over the juicing screw and into the juicing bowl and twist until firmly locked into place – figure 3.
Figure 1
Figure 3
7
