Sungale ID730WTA user manual Using MICRO-SD Card, Getting Started

USING MICRO-SD CARD

The device supports maximum 32GB micro SD card.

Insert your card into the micro SD slot until it clicks into place. Then it's ready for visiting.

Remove microSD Card

Close all applications or documents which have been opened on the card. Tap SettingsStorageSD cardUnmount this storage device. When it

displayed Mount this device, press the card lightly; it is partially ejected allowing you to pull the card out.

Don't insert and remove the USB flash drive repeatedly in a short time, as this may cause damage to the card.

We recommend using good quality memory cards to avoid incompatibility.

GETTING STARTED

Charge the device

It is not recommended to use the device while charging.

Plug the power adapter into an electrical outlet, and then connect to the device to fully charge the battery before use (A full charge takes about 6 hours when the battery's run out).

Turn the device on

Press the power button and hold for 2 seconds.

Wi-Fi Network Setup

Since many functions require a Wi-Fi connection, we recommend you to set up your Wi-Fi network firstly.

1.Tap Settings.

2.Slide Wi-Fiswitch to turn on.

The device scans automatically and lists all local Wi-Fi Network found. A lock indicates secure Wi-Fi networks that require input of password to connect.

1.Tap the desired network which you want to connectenter the Network Password if applicabletap Connect.

2.Tap to return to the Desktop screen.

4