Sunwave Tech SRC-3820 manual Using Code Learning Mode, Learning from another Remote Control

Code Menu

Using Code Learning Mode

The Learning function enables the SRC-3820 to program other remote controls.

Learning from another Remote Control

Put the target remote control under the SRC-3820 and point at the SRC-3820’s learning eye, which is located at the bottom of the unit.

1.Select Learn option.

2.Tap to confirm.

3.Point the infrared eye of target remote control at the learning eye of SRC-3820 (see Page 3) and keep apart between 2~4 inches (5~10cm).

4.Select a device to learn codes from the target remote control (AMP for example). The screen firstly will display a page of soft keys that correspond to under hard buttons for you to learn codes. Every key on screen will be flashing. If you desire to end off flashing on that key, you need to learn the corresponding button from your original remote control now.

17