SUPER MICRO Computer 6015T-T manual Universal Serial Bus USB, LAN1/2 Ethernet Ports, Wake-On-LAN

Chapter 5: Advanced Serverboard Setup

Universal Serial Bus (USB)

There are two Universal Serial Bus ports located on the I/O panel and two additional USB headers located on the serverboard. The headers, labeled USB2 and USB3, can be used to provide front side USB access (cables not included). See the tables on the right for pin defi nitions.

USB Ports Pin

Definitions (USB0/1)

Pin# Defi nition

1+5V

2PO-

3PO+

4Ground

5N/A

USB Headers

Pin Definitions (USB1, USB2)

USB3/5		USB2/4
Pin #	Defi nition	Pin #	Defi nition
1	+5V		+5V
		1
2	PO-		PO-
		2
3	PO+		PO+
		3
4	Ground		Ground
		4
5	Key		NC
		5

Note: NC indicates no connection.

LAN1/2 (Ethernet Ports)

Two gigabit Ethernet ports (designated LAN1 and LAN2) are located beside the VGA port on the I/O backplane. These ports accept RJ45 type cables.

Wake-On-LAN

The Wake-On-LAN header is des- ignated JWOL on the serverboard. See the table on the right for pin defi nitions. You must enable the LAN Wake-Up setting in BIOS to use this function. (You must also have a LAN card with a Wake-On-LAN connector and cable to use this feature.)

Wake-On-LAN

Pin Definitions

(JWOL)

Pin# Defi nition

1+5V Standby

2Ground

3Wake-up

5-15