SUPER MICRO Computer 6015T-INF, 6015T-T manual Running Setup, Main Bios Setup

SUPERSERVER 6015T-T/6015T-INF User's Manual

7-2 Running Setup

Default settings are in bold text unless otherwise noted.

The BIOS setup options described in this section are selected by choosing the ap- propriate text from the main BIOS Setup screen. All displayed text is described in this section, although the screen display is often all you need to understand how to set the options (See the next page).

When you fi rst power on the computer, the Phoenix BIOS™ is immediately acti- vated.

While the BIOS is in control, the Setup program can be activated in one of two ways:

1.By pressing <Delete> immediately after turning the system on, or

2.When the message shown below appears briefl y at the bottom of the screen during the POST (Power On Self-Test), press the <Delete> key to activate the main Setup menu:

Press the <Delete> key to enter Setup

7-3 Main BIOS Setup

All main Setup options are described in this section. The main BIOS Setup screen is displayed below.

Use the Up/Down arrow keys to move among the different settings in each menu. Use the Left/Right arrow keys to change the options for each setting.

Press the <Esc> key to exit the CMOS Setup Menu. The next section describes in detail how to navigate through the menus.

Items that use submenus are indicated with the	icon. With the item highlighted,
press the <Enter> key to access the submenu.

7-2