SUPER MICRO Computer 6015T-INF, 6015T-T manual Control Panel LEDs

SUPERSERVER 6015T-T/6015T-INF User's Manual

3-3 Control Panel LEDs

Each of the two control panels located on the front of the SC808T-980 chassis has

five LEDs. Each LED provides you with critical information related its own specifi c serverboard. This section explains what each LED indicates when illuminated and any corrective action you may need to take.

Overheat/Fan Fail: When this LED fl ashes, it indicates a fan failure. When on continuously it indicates an overheat condition, which may be caused by cables obstructing the airfl ow in the system or the ambient room temperature being too warm. Check the routing of the cables and make sure all fans are present and operating normally. You should also check to make sure that the chassis covers are installed. Finally, verify that the heatsinks are installed properly (see Chapter 5). This LED will remain fl ashing or on as long as the indicated condition exists.

2

NIC2: Indicates network activity on LAN2 when fl ashing .

1

NIC1: Indicates network activity on LAN1 when fl ashing.

HDD: Channel activity for the hard disk drives. This light indicates SATA drive activity on the 6015T-T/6015T-INF when fl ashing.

3-2