1-2
SUPERSERVER 6015T-T/6015T-INF User's Manual
1-2 Serverboard Features
At the heart of the SuperServer 6015T-T/6015T-INF lies two X7DBT-T/X7DBT-INF
dual processor serverboards, which are based on Intel's 5000P chipset. Below
are the main features of the X7DBT-T/X7DBT-INF. Note that the features on each
board are doubled for the server (see Appendix C).
Processors
Each X7DBT-T/X7DBT-INF supports dual Intel® Xeon® 5300/5100 Series proces-
sors. Please refer to our web site for a complete listing of supported processors
(www.supermicro.com).
Memory
The X7DBT-T/X7DBT-INF has eight 240-pin DIMM sockets that can support up to
32 GB of ECC FBD (Fully Buffered DIMM) DDR2-667/533 SDRAM. Memory can
be installed in both interleaved (dual-channel) and non-interleaved (single-channel)
confi gurations. All memory modules used to populate the system should be the
same size, type and speed.
Serial ATA
The South Bridge (ES B2) of the 5000P chip set includes a Serial ATA control-
ler for 3 Gb/s SATA drives. The hot-swappable SATA drives are connected to a
backplane that provides power, bus termination and confi guration settings. RAID
0 and 1 are supported.
PCI Expansion Slots
Each X7DBT-T/X7DBT-INF board has one PCI-Express x8 slot, so two PCI-Express
x8 slots are provided in the server. In the 6015T-T/6015T-INF server confi gura-
tion, riser cards have been pre-installed to support two low-profi le PCI-Express x8
add-on cards.
Ethernet Ports
Two Intel® 82563EB network controllers are integrated into the 5000P chipset on
each of the serverboards to support a total of four Gigabit LAN ports (100/1000Base-
T/1000BaseTX, RJ45 output).