Product Features 1-3
Copyright © 2004 by LSI Logic Corporation. All rights reserved.
•ability to select a logical drive as boot device
•support for power-on self test (POST) Memory Management (PMM) for the
BIOS memory requirement (Specification v1.01, November 21, 1997)
•enhanced disk drive support (Specification 2.9, revision 08, March 12,
1998)
•Industry-standard EBDA
•Self-monitoring analysis and reporting technology (S.M.A.R.T.) notification
at POST
•run-time BIOS support for device insertion or removal
•independent support for WC, RC, and UDMA (direct memory access)
•support for Stop On Error during bootup
•support to disable/enable BIOS state
1.2.3 Driver FeaturesThe driver features include
•special interface for configuration information, configuration changes, and
manageability
•optimized disk access
•support for RAID levels 0, 1, and 10
•support for Stand-by and Hibernation in Windows 2000, XP, and 2003
Note: The following items require Spy Service to be running in order
to work.
•error logging in the operating system event log and on disks
•support for online mirror rebuilding
•support for check consistency for mirrored disks
•bootable RAID 0, 1, and 10 support
•customized messages specific for OEM (original equipment manufacturer)
•soft bad block management