4-6 Operating System Installation
Copyright © 2004 by LSI Logic Corporation. All rights reserved.
Step7. Follow the Red Hat Linux installation procedure to complete the
installation.
Step8. Reboot the system.
4.3.4 SuSE Linux 9.0 Driver Installation on a New System
This section describes the fresh installation of a Linux SuSE 9.0 system with the
Embedded Software RAID Stack. Prepare installation disks with the driver
image, then perform the following steps to install the driver:
Step1. Boot your system using the SuSE 9.0 CD 1.
Step2. At the prompt, press <F3> to confirm that you have a driver diskette.
Step3. Highlight Installation on the menu using the arrow keys, then press
<Enter>.
You are prompted for the diskette.
Step4. Insert the driver update disk in the A:/ drive and press <Enter>.
The message “Driver Updates added” displays.
Step5. Press <Enter>.
You are prompted to select the Driver Update Medium.
Step6. Select Back and press <Enter>.
This returns you to the installation.
Step7. Press <Accept>.
The driver installation begins.
Step8. Press <Accept> again.
A warning screen displays to make sure you want to continue the
installation with these settings.