Embedded SATA Software RAID 5-1
Copyright © 2004 by LSI Logic Corporation. All rights reserved.
Chapter 5Hyper Configuration Utility
HYPERCFG is a command line utility for ICH6R software. This chapter details
the product features in these sections:
•Section 5.1, “General Description,” page 5-1
•Section 5.2, “Installing HyperCFG,” page 5-2
•Section 5.3, “Using HyperCFG,” page 5-2
•Section 5.4, “Configuration File,” page 5-8
•Section 5.5, “Return Codes on Error Condition,” page 5-10

5.1 General Description

HYPERCFG is a command line utility for SATA RAID. The main features
supported in this utility are:
•ability to create RAID arrays
•ability to save RAID configuration information to file
•ability to display RAID configuration data
•ability to configure RAID from file
•display of RAID option ROM version
•ability to read and display specified sector from drive
•ability to add error code information
•ability to dump identify device command packet
•self-monitoring analysis and reporting technology (S.M.A.R.T.) option
•ability to set disk coercion
•ability to rebuild failed drives