3-6 BIOS Configuration Utility
Copyright © 2004 by LSI Logic Corporation. All rights reserved.
Figure3.1 Configuration Menu Screen
Step2. Press the spacebar to associate the selected physical drives with the
current array.
The indicator for the selected drives changes from READY to ONLIN
A[array number]-[drive number]. For example, ONLIN
A1-3 means array 1 with disk drive 3.
Step3. Press <Enter> after you finish creating the current array.
Step4. Press <F10> to select configurable arrays.
Step5. Press the spacebar to select the array.
The logical drive configuration screen displays, as shown in Figure 3-
2. The logical drive configuration screen displays the logical drive
number, RAID level, logical drive size, the number of stripes in the
physical array, the stripe size, and the state of the logical drive.