Novell NetWare Driver Installation 4-9
Copyright © 2004 by LSI Logic Corporation. All rights reserved.
Step3. Highlight Default using the arrow keys, then press <Enter> to change
the option to Manual.
Step4. Highlight Continue and press <Enter>.
The screen used to prepare the boot partition displays.
Step5. Highlight Free Space, then press <Enter>.
Step6. Accept the default (500 MB) or modify as desired, then press
<Enter>.
Step7. Highlight Continue, then press <Enter>.
The Server Settings screen displays. You can modify the settings
before going to the next screen.
Step8. Highlight Continue, then press <Enter>.
The system goes through device driver detection, then the screen
displays the device type and driver name. You can modify the device
type and driver name.
Step9. Press Continue, then press <Enter>.
The driver names display.
Step10. Select Storage adapters using the arrow keys and press <Enter>.
Step11. Highlight IDEATA.HAM Standard ATA/IDE RAID Adapter
Controller in the list of files.
Step12. Press <Delete> to remove the highlighted filename.
Note: Do not highlight IDEATA.HAM Standard
ATA/IDE/ATAPI Adapter Controller in the list of
files; it is needed for the ATAPI CD-ROM drive to operate.
Step13. Press <Insert> to add a driver.
Step14. Press <Insert> again.
Step15. If you have the driver on a diskette, insert it in the A:/ drive.
The install program automatically searches for the driver on the A:/
drive.
Step16. If you do not have the driver on a diskette, enter the path for the file.
Step17. Press <Enter>.
The Intel RAID controller displays. There is one driver per controller
to remove or add.