Using HyperCFG 5-3
Copyright © 2004 by LSI Logic Corporation. All rights reserved.
Table5.1 HyperCFG Options and Attributes
Options Description
/S Silent Operation. When this option is set, the utility does not prompt the user.
/F[File
Name]This option redirects the output to the specified filename.
If the filename is not specified, then the filename defaults to HyperCFG.CFG.
/L [/C<n>][/D<cd>]
[/B[Filename]] Displays the configuration sector of the specified drive <Drive-ID>
Using only /L displays the configuration sector from the first available
drive.
Use [/B[Filename]] to dump the IRCD as bin file.
If the filename is not specified, the default filename is
hypercfg.bin.
/E[o][/C<n>][/D<cd>] Erases the configuration sector of the specified drive <Drive-ID>
The [o] field can be any of the following:
C Erases the configuration sector only
E Erases the error log sector only
A Erases both configuration and error log sectors
/@/b<bfn> Configures the RAID array from the specified configuration file.
If the filename is not specified, the default filename is
hypercfg.bin.