SBI-7127R-S6 Blade Module User’s Manual
Memory Support
The SBI-7127R-S6 blade module supports up to 512 GB of RDIMM and 128 GB of UDIMM DDR3 1600/1333/1066/800 MHz speed, 32GB, 16GB, 8GB, 4GB, 2GB and 1GB size SDRAM memory in sixteen (16) 240-pin DIMM sockets. See Section 3-5:
Memory Installation on page 3-9for further details on mainboard memory installation.
Hard Disk Drives
The SBI-7127R-S6 blade unit accommodates up to six 2.5" SATA/SAS/SSD hard disk drives, which are mounted in drive “trays”. The drives can be hot-swapped and removed or replaced without powering down the blade unit they reside in. The six drives can be used to set up a RAID array (RAID 0, 1, 5 and 10 Windows; RAID 0, 1 and 10 Linux; RAID 0, 1, 5, 6, 10 and 50 SAS) or JBOD. These drives use a yellow color for the Blade HDD active LED. See Chapter 1 for further details on RAID Setup.
Caution: To maintain proper airflow, both hard drive bays must have drive carriers inserted during operation whether or not a drive is installed in the tray.
