SUPER MICRO Computer SBI-7127R-S6 user manual Blade Module Features, Processors, Memory

SBI-7127R-S6 Blade Module User’s Manual

1-3 Blade Module Features

Table 1-1lists the main features of the SBI-7127R-S6 blade module. See the proceeding section for components typically included in a blade system and other optional components. Specific details for the SBI-7127R-S6 blade module are found in Chapter 4: "Blade Module Features" on page 4-1.

Table 1-1. SBI-7127R-S6 Blade Module Specification Features
Mainboard	B9DR7 (proprietary form factor)
	Chassis Dimensions (HxWxD): 11.32" x 1.67" x 18.9" (288mm x 42.4mm x
	480mm)
Processors	Eight/six/four core Intel™ Xeon® E5-2600 series 2011-pin processors.
	Please refer to our web site for a complete listing of supported processors.
FSB Speed	QPI up to 8 GT/s
Chipset	Intel C602J
Graphics Controller	Integrated Matrox G200 Graphics
BIOS	16 Mb SPI Flash EEPROM with AMI® BIOS
	Supports up to 512 GB of RDIMM and 128 GB UDIMM SDRAM memory of
Memory Capacity	DDR3 1600/1333/1066/800 MHz speed and 32GB, 16GB, 8GB, 4GB, 2GB
	and 1GB size in sixteen (16) 240-pin DIMM sockets
HDD Controller	LSI™ 2208® RAID controller
Hard Drive Bays	Includes six hot-swap drive bays for 2.5" SATA/SAS/SSD disk drives

Processors

The SBI-7127R-S6 blade module supports dual 2011-pin Socket R (LGA 2011) E5-2600 series processors.

Refer to the Supermicro web site for a complete listing of supported processors (http:// www.supermicro.com/products/superblade). Please note that you will need to check the detailed specifications of a particular blade module for a list of the CPUs it supports.

Details on installation of the processor into the SBI-7127R-S6 blade module are found in Chapter 3: "Setup and Installation" on page 3-1.

Memory

Both the SBI-7127R-S6 blade module have sixteen (16) 240-pin DIMM sockets that can support up to 512 GB RDIMM or 128 GB UDIMM of DDR3 1600/1333/1066/800 MHz speed, 32GB, 16GB, 8GB, 4GB, 2GB and 1GB size SDRAM memory. Memory is interleaved, which requires modules of the same size and speed to be installed in groups (of two or three).

Please refer to the Supermicro web site for a list of supported memory

(www.supermicro.com/products/superblade). The detailed specifications for a blade module will contain a link to a list of recommended memory sizes and manufacturers.

1-2