SUPER MICRO Computer SBI-7127R-S6 user manual PCIe/PCI/PnP Configuration Sub-menu Menu Option

SBI-7127R-S6 Blade Module User’s Manual

Table 5-7. PCIe/PCI/PnP Configuration Sub-menu

Menu Option

PCI ROM Priority

PCI Latency Timer

Above 4G Decoding

PERR# Generation

SERR# Generation

Maximum Payload

Maximum Read

Request

ASPM Support

Onboard LAN Option ROM Select

Load Onboard LAN 1 Option ROM

Load Onboard LAN 2 Option ROM

Network Stack

Description

Use this setting in case of multiple Option ROMs to specify what PCI Option ROM to launch. Options include Legacy ROM and EFI Compatible ROM.

This sets the value to programmed into the PCI Latency Timer Register. Options include 32, 64, 96, 128, 160, 192, 224 an 248.PCI Bus Clocks.

This setting allows you to Enable or Disable decoding of 64-bit capable devices in the Above 4G Address Space. This setting is only usable if your system supports 64-bit PCI decoding.

This setting allows you to Enable or Disable the PCI device to generate a PERR#.

This setting allows you to Enable or Disable the PCI device to generate a SERR#.

Use this setting to set the maximum payload of the PCI Express device or allow the system BIOS to select the value. Options include Auto, 128 Bytes, 256 Bytes, 512 Bytes, 1024 Bytes, 2048 Bytes or 4096 Bytes.

Use this setting to set the maximum read request size of the PCI Express device or allow the system BIOS to select the value. Options include Auto, 128 Bytes, 256 Bytes, 512 Bytes, 1024 Bytes, 2048 Bytes or 4096 Bytes.

This sets the ASPM Level for your system. Options include Disabled (disables ASPM), Auto (lets BIOS auto configure) or Force L0s (force all links to L0s state).

This setting allows you to select the onboard LAN option ROM to be either PXE or iSCSI. Note: If iSCSI is selected, LAN1 Option ROM select will cover all other Oboard LANs.

This setting Enables or Disables onboard option ROM for LAN1.

This setting Enables or Disables onboard option ROM for LAN2.

This setting allows you to Enable or Disable the network stack (Pxe and UEFI).

Table 5-8. SuperIO Device Configuration Sub-menu
Menu Option	Description
Super IO Chip	This static display shows the name of the Super IO chip installed for your
	system.
Serial Port 1	This submenu allows you to configure Serial Port 1.
Configuration
Serial Port	This setting allows you to Enable or Disable the Serial Port.
Device Settings	This static display shows device settings for serial port 1 configuration.
	Use this setting to select an optimal setting for the Super IO device to use for the
Change Settings	Serial Port. Options include Auto, IO=3F8h/IRQ=4, IO=3F8h/IRQ=3~12,
	IO=2F8h/IRQ=3~12, IO=3E8h/IRQ=3~12 and IO=2E8h/IRQ=3~12
Serial Port Mode	This setting allows you to set the Serial Port Mode to either Normal or High
	Speed.

5-10