Chapter 2: Installation
Reset Button
The Reset Button connection is located on pins 3 and 4 of JF1. Attach it to a hardware reset switch on the computer case. This switch is used to hard reset/ reboot the system. Refer to the table on the right for pin definitions.
Power Button
The Power Button connection is located on pins1 and 2 of JF1. Momentarily con- tacting both pins will power on/off the sys- tem. This button can also be configured to function as a suspend button (with a setting in the BIOS - see Chapter 4). To turn off the power in the suspend mode, press the button for at least 4 seconds. Refer to the table on the right for pin definitions.
Power LED 
HDD LED
NIC1 LED 
NIC2 LED
OH/Fan Fail LED 
X
Ground
Ground 
2 1
Reset Button
Pin Definitions (JF1)
Pin# Definition
3Reset
4Ground
Power Button
Pin Definitions (JF1)
Pin# Definition
1Signal
2Ground
A.Reset Button
B.PWR Button
LED_Anode+
LED_Anode+
LED_Anode+
LED_Anode+
LED_Anode+
X
Reset Reset Button A
PWR Power Button B
