SUPER MICRO Computer X9SCM-IIF Unsupported Memory LED, Power Standby LED, Ipmi Heartbeat LED

X9SCM-IIF/X9SCL-IIF Series User's Manual

Onboard Power LED

An Onboard Power LED is located at LE2 on the motherboard. A lit LE2 indicates that the motherboard is either booting, or it is up and running. See the layout below for the LED location.

Unsupported Memory LED

The Unsupported Memory LED is located at location LE3. When this LED blinks/ flashes, it indicates that there is an un- supported DIMM module installed.

Power Standby LED

The Power Standby LED is located at LE4. When the power supply is plugged into an AC outlet, and the power sup- ply hard switch is switched on, LE4 will turn on indicating Power Standby mode. Please make sure LE4 is off before performing service on the motherboard.

IPMI Heartbeat LED

An IPMI Heartbeat LED is located at LE7. When LE7 blinks, the IPMI functions properly. Refer to the table on the right for details. Also see the layout below for the LED location.

KB/MOUSE JF1

USB/0/1	IPMI	_LAN	DIMM1BDIMM2B
COM1			DIMM2A
			DIMM1A

				DDR3 1066/1333 UDIMM required
VGA
		CPU
LAN1
LAN2
	SLOT7 PCI-E 2.0 X8
	SLOT6 PCI-E 2.0 X8
	SLOT5 PCI-E 2.0 X4 ON X8					I-SATA1 I-SATA0
D				JBT1
	SLOT4 PCI-E 2.0 X4 ON X8
				I-SATA5		-SATA3 -SATA2
					I-SATA4	I I
COM2	USB 12/13	USB4/5	USB2/3	USB11

C B A

	Onboard PWR LED
Status		Definition
Off		System Off
On		System On (running)
Unsupported Memory LED (LE3)
Green: Blinking			Unsupported Memory
			is Installed
Green: Steady			Normal/No Error
Power Standby LED Indicator (LE4)
		LED Settings
Green: Solid On			Standby Power is On
Green: Off			Standby Power is Off
			(either the power sup-
			ply hard switch is off or
			system is unplugged,
			or BOTH.)
IPMI Heartbeat LED Indicator (LE7)
		LED Settings
Green: Blinking			IPMI is Active

A. Onboard PWR LED

B. Unsupported Memory LED

C. Power Standby LED

D. IPMI Heartbeat LED

2-40