SV Sound SB13-Plus, PB12-Plus, PC12-Plus, SB13-Ultra, PB13-Ultra, PC13-Ultra manual Setup & Use of PEQ

Models: PC12-Plus PB12-Plus

1 34
Download 34 pages 43.96 Kb
Page 32
Image 32
Set the Frequency control to the approximate center frequency of the largest peak. Set the Q control to 14.4 (narrowest bandwidth), and set the Level control to -6 dB. Play the test tones again and re-measure and re- plot the affected portion of the FR curve and visually evaluate your results. Simple trial/error will then allow you to adjust all three controls to shape the PEQ cut to achieve the desired effect.

STA-800D/1000D Equipped Subs

SVSound

Setup & Use of PEQ

Set the Frequency control to the approximate center frequency of the largest peak. Set the Q control to 14.4 (narrowest bandwidth), and set the Level control to -6 dB. Play the test tones again and re-measure and re- plot the affected portion of the FR curve and visually evaluate your results. Simple trial/error will then allow you to adjust all three controls to shape the PEQ cut to achieve the desired effect.

The previous image shows the results of the first PEQ cut attempt. The Frequency and Cut effect look cor- rect, but the Q is too narrow. Adjust the Q to 9.6 and try again.

FIG. 16

The graph above illustrates the results of the wider Q setting. Notice how the cut effect is wider. This is now a satisfactory result.

© 2011 Specialty Technologies, LLC Call SVSound877.626.5623 www.svsound.com

32

Page 32
Image 32
SV Sound SB13-Plus, PB12-Plus, PC12-Plus, SB13-Ultra, PB13-Ultra, PC13-Ultra manual Setup & Use of PEQ