Swann H.264 manual Front Panel of the DVR, English, Connecting the DVR

Models: H.264

1 60
Download 60 pages 36.73 Kb
Page 6
Image 6
Front Panel of the DVR

English

Front Panel of the DVR

Connecting the DVR

1 2 3

1)Infrared Sensor: Monitors signals coming from the infra- red remote control. If this sensor is blocked or obstructed, then the functionality of the remote will be impaired.

2)Hard Drive Indicator: Lights up when the hard drive is active. It will flash rapidly when recording or searching (in time with the read/write cycles).

3)Power Indicator: This LED is illuminated when the DVR is connected to power and switched on.

1)Infrared Sensor: Monitors signals coming from the infra- red remote control. If this sensor is blocked or obstructed, then the functionality of the remote will be impaired.

2)Power Indicator: This LED is illuminated when the DVR is connected to power and switched on.

1

2 3

4

3)Hard Drive Indicator: Lights up when the hard drive is active. It will flash rapidly when recording or searching (in time with the read/write cycles).

4)USB 2.0 Port: For connecting USB external storage to the DVR for backup, or for applying new firmware.

4

1

2

3

1)USB 2.0 Port: For connecting USB external storage to the DVR for backup, or for applying new firmware.

2)Power Indicator: This LED is illuminated when the DVR is connected to power and switched on.

3)Hard Drive Indicator: Lights up when the hard drive is active. It will flash rapidly when recording or searching (in time with the read/write cycles).

4)Infrared Sensor: Monitors signals coming from the infra- red remote control. If this sensor is blocked or obstructed, then the functionality of the remote will be impaired.

6

Page 6
Image 6
Swann H.264 manual Front Panel of the DVR, English, Connecting the DVR