For your safety
Please read the following safety precautions before setting up your phone.
Certification information
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the Federal Communications Commission Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
Modifying the equipment without Swissvoice’s written authorization may result in the equipment no longer complying with FCC requirements for Class A digital devices. In that event, your right to use the equipment may be limited by FCC regulations, and you may be required to correct any interference to radio communications at your own expense.
Operating conditions
This telephone is to be operated on a local area network. The calls are handled by a call manager using MGCP, H323 or SIP signalling protocol. The telephone must be equipped with the appropriate software version.
Location
Place your telephone in a safe place, on a
Do not expose the telephone to direct sunlight or other sources of heat. Keep it in an ambient temperature between +5°C and +35°C.
Keep the telephone dry. Avoid wet or dusty locations.
Avoid locations where your telephone is exposed to aggressive liquids or vapours.
Avoid locations in the immediate vicinity of
IP10S / IP10 user guide | 3 | 02P182000Aen |
