For your safety

Connection

Plug the telephone’s connecting cables into the appropriate sockets only. Never try to change the plugs on the connecting cables.

Only a Swissvoice power adaptor must be used with the IP10S and IP10 phones. Swissvoice power adaptor references are:

For US: 02P175500A

For Europe: 20314471, 02P175600A

For UK: 02P183100A

For Australia: 02P183200A

Use of a third party power adaptor would be improper. Consequently, in case of product defect or flaw caused by this improper use, the guarantee will not apply.

Security

The plug-in power supply is used as a disconnection device.

The network and power supply accesses of the phone are classified SELV (Safety Extra Low Voltage). The mains access of the plug-in power supply is classified Dangerous voltage.

Care

Never carry the telephone by its connecting cord.

Clean the set with a soft, slightly damp or anti-static cloth. Do not use any detergents or chemicals to clean the set.

Qualified service

Do not attempt to open the phone. Only qualified personnel may repair phone equipment. Changes or modifications not expressly approved by Swissvoice could void the user’s authority to operate the equipment. If your telephone is faulty or defective, please contact your supplier.

Information regarding the products in this manual is subject to change without notice. This guide is believed to be accurate but is presented without warranty of any kind, express or implied. The usable services and features on the phone depend on the installed software release and on the call manager. Therefore, the conformity of the user guide cannot be guaranteed.

IP10S / IP10 user guide

4

02P182000Aen

Page 5
Image 5
Swiss Diamond IP10S manual Connection, Security, Care, Qualified service