Sylvania 6900DTD Connections STB connection to a standard stereo system, Stereo Component

Connections

STB connection to a standard stereo system

NOTE:

Component video cable and audio cable are not included.

Rear panel of STB

STEREO COMPONENT

Audio cable

To audio input jacks (L, R)

Component video cable

To component video input

jacks (Y/ Pb/ Pr)

1Use a standard antenna cable to connect the wall jack to the ANT. IN jack on STB.

2Use a standard audio cable to connect the audio output jacks (L, R) on STB to the audio input jacks (L, R) on the stereo.

3Connect STB and the TV with a video cable.

NOTE:

Refer to the pages describing the connection to TV.

4Set the video resolution selection switch to “1080i.”

NOTE:

For the capability of your TV and further information, refer to TV owner’s manual.

5Plug the AC power cord of the stereo into the AC outlet, then turn the stereo on.

6Set the stereo to the input mode to which you connected the audio from the STB.

NOTE:

Refer to the stereo owner's manual for further information.

7Plug the AC power cord of STB into the AC outlet, then turn STB on.

22

EN

1A23