Sylvania 6900DTD Connections STB connection to a decoder with Dolby Digital, Digital Decoder

Connections

STB connection to a decoder with Dolby Digital

NOTE:

Coaxial digital audio cable and component video cable are not included.

Rear panel of STB

Digital Decoder	Coaxial digital
	audio cable
	To Coaxial digital	Component
	audio input jack
		video cable

To component video input

jacks (Y/ Pb/ Pr)

2 Connections

1Use a standard antenna cable to connect the wall jack to the ANT. IN jack on STB.

2Connect a coaxial digital audio cable (purchase locally) from DIGITAL AUDIO (COAXIAL) output jack on STB to a coaxial digital audio input jack on the digital decoder.

3Connect STB and the TV with a video cable.

NOTE:

Refer to the pages describing the connection to TV for connecting to the TV.

4Set the video resolution selection switch to “1080i.”

NOTE:

For the capability of your TV and further information, refer to TV owner’s manual.

5Plug the AC power cord of the decoder into an AC outlet, then turn the decoder on.

6Set the decoder to the input mode.

NOTE:

Refer to the decoder owner's manual for further information.

7Plug the AC power cord of STB into an AC outlet, then turn them on.

NOTE:

STB will output the sound from the DIGITAL AUDIO (COAXIAL) output only when receiving a digital broadcast.

Dolby® information:

Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby Laboratories.

23

EN

1A23