Sylvania LD320SS1, A9DF1UH owner manual Main Menu

OPTIONAL SETTING

Main Menu Autoscan

This section describes the overview of the main menu displayed when you press [SETUP]. For more details, see the reference page for each item. The main menu consists of the function setting items below.

Press [SETUP]

PICTURE

You can adjust the picture quality.

Refer to “Picture Adjustment” on page 23.

SOUND

You can adjust the sound quality.

Refer to “Sound Adjustment” on page 24.

CHANNEL

•You can automatically scan the viewable channels. Refer to “Autoscan” on page 20.

•You can skip the undesired channels when selecting the channels using [CH K/L]

Refer to “Channel List” on page 21.

•You can add the channels that were not scanned by the autoscan.

Refer to “Manual Register” on page 21.

DETAIL

•You can change the display format for closed caption, which displays the dialogue of a TV program or other information across the TV screen.

Refer to “Closed Caption” on page 25.

•You can set the viewing limitations. Refer to ‘‘Child Lock” on page 28.

•You can adjust the position, stability and clarity of the PC screen.

Refer to “PC Settings” on page 32.

•You can select the energy saving mode. Refer to “Energy Saving Mode” on page 33.

•When you adjust the desired “PICTURE” and “SOUND” mode, you must switch the setting from “Retail” to “Home”. Refer to “Location” on page 33.

•You can confirm the version of the software currently used in this unit.

Refer to ”Current Software Info” on page 34.

LANGUAGE

You can change the language (English, Spanish, French) displayed on the main menu.

Refer to “Language Selection” on page 22.

DVD

You can customize some functions for the disc playback. Make sure the unit is in stop mode. Refer to “DVD SETTING“ section on page 44.

20

If you switch wires (e.g., between antenna and CATV) or if you move the unit to a different area after the initial setting, or if you restore the DTV channel you deleted, you will need to perform autoscan.

Before you begin: Make sure the unit is connected to antenna or cable.

1 Press [SETUP] to display the main menu.

2 Use [Cursor K/L] to select “CHANNEL”, then press

[ENTER]

or

3 Use [Cursor K/L] to select “Autoscan”, then press

[ENTER]

	Channell
or	Autoscan
	Channel List
	Manual Register
	Antenna

Use [Cursor K/L] to select an appropriate option, then press [ENTER]

	Autoscan
or	Autoscan will rescan all channels.			Back
	Autoscan will take up to 20 minutes to			Antenna
	complete.
				Cable
	Select the destination of "ANT.IN" jack.
	Antenna	Or
	Cable		ANT.IN

•When aerial antenna is connected, select “Antenna”.

•When connected to CATV, select “Cable”.

•“Autoscan” will begin.

Now the system is scanning for Channels,please wait

Autoscan will take up to 20 minutes to complete.

75%

Analog channels		10ch
Digital channels		6ch
SETUP	Exit

•When the scanning and memorizing are completed, the lowest memorized channel will be displayed.

Note:

•After setting “Autoscan”, using [CH K / L] on the remote control skips unavailable programs automatically.

•If you are not receiving a signal from your cable service, contact the Cable provider.

•If you press [POWER] or [SETUP] during autoscan, the setting will be canceled.

•Even if “Autoscan“ is completed, the channel setting will be lost if the AC power cord is unplugged before turning off the unit by pressing [POWER].

•The PIN Code will be required once you set a PIN Code in the “Child Lock”. Refer to page 28.

•If you want to change your PIN Code, follow the instruction of “New Password”. Refer to page 31.

EN