Sylvania A9DF1UH  Channel List, Use Cursor K/L to select Manual Register, then, Press Enter

Channel List

The channels selected here can be skipped when selecting the channels using [CH K/L].

Those channels can still be selected with [the Number buttons].

1 Press [SETUP] to display the main menu.

2 Use [Cursor K/L] to select “CHANNEL”, then press

[ENTER].

or

	Español	Français	English
	 Manual Register			INTRODUCTION
This function lets you add the channels that were not added by
the autoscan due to the receptible condition at the initial setting.
	1 Press [SETUP] to display the main menu.			PREPARATION
2 Use [Cursor K/L] to select “CHANNEL”, then press
	[ENTER]
				WATCHING
	or
				TV

3 Use [Cursor K/L] to select “Channel List”, then press

[ENTER]

	Channell
or	Autoscan
	Channel List
	Manual Register
	Antenna

4 Use [Cursor K/L] to select the channel you want to remove, then press [ENTER]

	Channell Listi
	Highlight channels for Ch
or		DTV	6
	Up/Down key selection.
			27
		DTV	8
			9
		DTV	48
			58

DTV 67

BACK

Ch Select ENTER Watch/Skip Back

•The channel display for the removed channel darkens. You will not be able to select the channel again using [CH K/L]

•To reactivate a removed channel, use [Cursor K/L] and press [ENTER]. The registered channels are highlighted.

•When you remove a main channel, its subchannels are removed as well.

Note:

•The channel with the “DTV” indicated on the display is ATSC. Otherwise the channel is NTSC.

5 Press [SETUP] to exit.

							OPTIONAL
3 Use [Cursor K/L] to select “Manual Register”, then
		press [ENTER]
				Channell			SETTING
			or	Autoscan
				Channel List
				Manual Register
				Antenna
							OPERATING
4 Use [the Number buttons] to enter the number of the
		channel you want to add, then press [ENTER]					DVD
					11
							DVD
				Manuall Registeri
				For analog channels, select a		Register
				channel to register using number			SETTING
				keys.
				For digital channels, you must
				perform Autoscan function.
				Ch Change	BACK
						Back
							TROUBLESHOOTING
5 Press [SETUP] to exit.
		Note:					INFORMATION
			• If setup completes successfully,
			“Added to the channel list” is displayed.
			• If external input is used, it is not possible to register the
			channel and “Unavailable” will be displayed on the TV
			screen.
			• By using [CH K / L], you can select the memorized
			channels only.

21

EN