Sylvania A9DF1UH, LD320SS1  Still Mode,  Switching Each Input Mode, Switching Audio Mode

Español Français English

Still Mode

You can pause the image shown on the TV screen.

Press [PAUSE F] to pause the image shown on the TV screen.

Still

•The sound output will not be paused.

•If no signal is detected or protected signal is received during still mode, the image remains paused and the sound output will be muted.

•The still function will be released after 5 minutes.

To cancel still mode, press any button except [POWER].

Switching Each Input Mode

You can easily switch with the remote control between TV (ATSC or NTSC) and external devices when they are connected to the unit.

Press [INPUT SELECT] or [CH K] repeatedly to cycle through the input modes.

Input Select

TV

Video

Component

HDMI1

HDMI2

DTV/TV channel

or Video

Component

HDMI1

(or PC input)

HDMI2

Pressing [CHL] reverses the direction of the input modes.

	Switching Audio Mode							INTRODUCTION
This section describes how to switch the audio in the analog mode and how
to switch the audio language in the digital mode.
		TV
		Press [AUDIO] to display the currently selected						PREPARATION
		audio mode. While receiving an MTS broadcast,
		press repeatedly to cycle through the available audio
		channel.
					11
					SAP / STEREO
		When all audio are available						WATCHING
		SAP / STEREO					SAP / MONO
				SAP / STEREO				TV
		When stereo and monaural audio are available
		MONO / STEREO					MONO / STEREO
								OPTIONAL
		When SAP and monaural audio are available
		SAP / MONO					SAP / MONO	SETTING
				MONO
		When only monaural audio is available
				(cannot be switched)
		STEREO	OPERATING
				: Outputs stereo-audio
		SAP	: Outputs second audio program
		MONO	: Outputs mono-audio
	DTV							DVD
1 Press [AUDIO] to display the currently selected
		language and the number of available languages.						DVD
					11-1			SETTING
						English 1/3
2 Press [AUDIO] repeatedly to cycle through the
							TROUBLESHOOTING
	available audio languages.
		• Available languages differ depending on the
		broadcast. “Other” is displayed when the audio
		language cannot be acquired, or the acquired
								INFORMATION
		languages are other than English, Spanish or French.
		Note:
		• [AUDIO] does not control external audio devices.
		• The information display will automatically disappear in a
		few seconds.

17

EN