Sylvania A9DF1UH, LD320SS1 owner manual  DVD Audio Setting, Down Sampling, Dolby Digital, Pcm

DVD Audio Setting

Choose the appropriate audio settings for your equipment. It only affects during the playback of DVD.

1 Press [SETUP] to display the main menu.

2 Use [Cursor K/ L] to select “DVD”, then press [ENTER].

	Setup
or	Press “ENTER” key to move to DVD Setup.

3 Use [Cursor s / B] to select “	”, then press [ENTER].
AUDIO
DRC		ON
DOWN SAMPLING		ON
DOLBY DIGITAL		BITSTREAM
ENTER/OK

4 Use [Cursor K/ L] to select the desired item, then press

[ENTER].

DRC (dynamic range control) (Default: ON)

This function is available only on the discs which are recorded in the Dolby Digital format.

or	AUDIO
	DRC	ON
	DOWN SAMPLING	ON
	DOLBY DIGITAL	BITSTREAM
	ENTER/OK

ON : Compress the range between soft and loud sounds.

OFF : No effects (original sound).

Español Français English

INTRODUCTION

DOWN SAMPLING (Default: ON)

This function is available only on digital outputting of a			PREPARATION
	AUDIO
disc recorded in 96kHz.
or
	DRC	ON
	DOWN SAMPLING	ON
	DOLBY DIGITAL	BITSTREAM	WATCHING
	ENTER/OK
ON : When outputting in 48kHz.			TV
OFF : When outputting the original sound.
Note:			OPTIONAL
“DOWN SAMPLING” is set to “OFF”.
• When playing back a 96 kHz disc with the copyright
protection or when ‘‘Virtual Surround” is set to “1” or “2”,
the sound will be down sampled at 48 kHz even if the
Refer to “Virtual Surround” on page 43.			SETTING
DOLBY DIGITAL	(Default: BITSTREAM)
Set to “BITSTREAM“ when this unit is connected to a			OPERATING
Dolby Digital decoder.
or	AUDIO		DVD
	DRC	ON
	DOWN SAMPLING	ON
	DOLBY DIGITAL	BITSTREAM
	ENTER/OK		DVD
BITSTREAM : Outputs Dolby Digital signals.			SETTING
PCM :	Converts the Dolby Digital into PCM.
	(2 channel)
5 Press [SETUP] to exit.			TROUBLESHOOTING
			INFORMATION

45

EN