Channel List Manual Register, Using CH K/L

Español Français English

Channel List	Manual Register
The channels selected here can be skipped when selecting the channels	This function lets you add the channels that were not added by
using [CH K/L].	the autoscan due to the receptible condition at the initial setting.
Those channels can still be selected with [the Number buttons].

INTRODUCTION

1 Press [SETUP] to display the main menu.

2 Use [Cursor K/L] to select “CHANNEL”, then press

3 Use [Cursor K/L] to select “Channel List”, then press [ENTER].

4 Use [Cursor K/L] to select the channel you want to remove, then press [ENTER].

•The channel display for the removed channel

darkens. You will not be able to select the channel again using [CH K/L].

•To reactivate a removed channel, use [Cursor K/L] and press [ENTER]. The registered channels are highlighted.

•When you remove a main channel, its subchannels are removed as well.

Note:

•The channel with the “DTV” indicated on the display is ATSC. Otherwise the channel is NTSC.

5 Press [SETUP] to exit.

1 Press [SETUP] to display the main menu.

2 Use [Cursor K/L] to select “CHANNEL”, then press

4 Use [the Number buttons] to enter the number of the channel you want to add, then press [ENTER].

PICTURE	Manuall Registeri
SOUND	For analog channels, select a	Register
SOUND	channel to register using number
	channel to register using number
CHANNEL	keys.
CHANNEL
	For digital channels, you must
DETAIL	perform Autoscan function.
LANGUAGE
BLU-RAY
USB		BACK
USB	Ch Change	Back
	Ch Change	Back

Note:

•If setup completes successfully,

“Added to the channel list” is displayed.

•If external input is used, it is not possible to register the channel and “Unavailable” will be displayed on the TV screen.

•By using [CH K / L], you can select the memorized channels only.

PREPARATION WATCHING TV OPTIONAL SETTING OPERATING BLU-RAY BLU-RAY SETTING TROUBLESHOOTING INFORMATION