Sylvania LD427SSX Camera Angles, Virtual Surround, PIP Bounusview Setting, Noise Reduction

OPERATING BLU-RAY

Camera Angles

BD DVD

Some BD/DVD may contain scenes which have been shot simultaneously from various angles. You can change the camera angle if “ ” appears on the screen.

1 During playback, press [ANGLE] repeatedly until ““ appears.

1 / 3

• angles can be varied on the displayed number.

2 Use [Cursor K/ L] repeatedly until your desired camera angle appears.

or 2 / 3

3 Press [BACK] or [ANGLE] to exit.

or

Virtual Surround

You can enjoy virtual surround on your 2 channel stereo system.

1 During playback, press [MODE] repeatedly until “				”
	appears.
			Off
2 Use [Cursor K/ L] to select the sound level.
	or		1
	Off	No surround effect

1Natural surround effect

2Stronger surround effect

3 Press [BACK] to exit.

Note:

•If “Angle Icon” is set to “Off” in “Others” menu, “ ” will not appear. (Refer to page 51.)

PIP (Bounusview) Setting

BD

Some BD-video have the PIP function which enables you to display the secondary video in the primary video. You can call up the secondary video by pressing [PIP] whenever the scene contains the secondary video.

1 During playback, press [PIP].

•primary video

•secondary video

•PIP information will appear.

2 Use [Cursor K/ L] to select the secondary video you want.

•The secondary video will be displayed and the secondary audio will be output.

3 Press [BACK] or [PIP] to remove the PIP information.

or

Note:

•Virtual surround does not function during rapid playback.

•For the virtual surround, audio signal will always be 2-channel LPCM.

•Turn down the level or select “Off” if the sound is distorted.

Noise Reduction

DVD

Reduces the noise of the playback picture.

1 During playback, press [MODE] repeatedly until “			”
appears.
	Noise Reduction	Off
2 Use [Cursor s / B] to select the sound level.
or	Noise Reduction	1
Off	Shows the original picture as recorded.
	Executes 3D noise reduction which detects and

1deletes the noise by comparing each picture frames.

Executes MPEG noise reduction which reduces

2the block noise and mosquito noise on the subtitle on movie.

3	Executes both MPEG noise reduction and 3D
	noise reduction.

3 Press [BACK] to exit.

Note:

•Secondary video can also be called up by pressing [MODE].

•The secondary audio will not be output when the secondary audio is set to “Off” or when “BD Audio Mode” is set to “HD Audio Output”. Refer to “Audio Soundtrack” on page 45 and “BD Audio Mode” on page 44.

46

Note:

•The setting will remain the same even if the unit is turned to the standby mode.

•You cannot adjust the setting during rapid playback.

EN