 Blu-ray Audio Setting | Sylvania LD427SSX

Blu-ray Audio Setting

Choose the appropriate audio settings for your equipment. It only affects during the playback of BD/DVD.

3 Follow steps 1-2on page 47, then use [Cursor K/ L] to select “ ”, then press [ENTER].

4 Use [Cursor K/ L] to select “ ”, then press [ENTER].

5 Use [Cursor K/ L] to select the desired item, then press

(Default: Mix Audio Output)

You can select whether to output the primary and secondary audio or only the primary audio.

	Mix Audio	At the same time, 7 outputs the primary and
	Output	secondary audio if it is available.
	HD Audio	Outputs only the primary audio.
	Output	Outputs only the primary audio.
	Output

(Default: Bitstream)

Set to “Bitstream“ when this unit is connected to a Dolby Digital decoder and DTS decoder.

		When playing back discs recorded in Dolby
	Bitstream	Digital, Dolby Digital Plus, Dolby TrueHD, DTS
	Bitstream	or DTS-HD, the corresponding core stream
		or DTS-HD, the corresponding core stream
		(Dolby Digital or DTS) are output.
	LPCM	2ch PCM signal will be output from Digital
	LPCM	Audio Out jack.
		Audio Out jack.

	Español	Français		English
					INTRODUCTION
Down Sampling			(Default: On)
This function is available only on digital outputting of a					PREPARATION
disc recorded in 96kHz.		Digital Out	Bitstream		PREPARATION
disc recorded in 96kHz.
		Audio
		BD Audio Mode	Mix Audio Output
		Down Sampling	On
		DRC	Auto
On	When outputting in 48kHz.				WATCHING
On	When outputting in 48kHz.
Off	When outputting the original sound.				TV
Note:					TV
Note:
• When playing back a 96 kHz disc with the copyright					OPTIONAL
protection or when ‘‘Virtual Surround” is set to “1” or “2”,					OPTIONAL
the sound will be down sampled at 48 kHz even if the
“Down Sampling” is set to “Off”.
(Refer to “Virtual Surround” on page 46.)					SETTING
DRC (dynamic range control)			(Default: Auto)		SETTING
DRC (dynamic range control)			(Default: Auto)
This function is available only on the discs which are					OPERATING
recorded in the Dolby Digital format.					OPERATING
recorded in the Dolby Digital format.
		Audio			BLU-RAY
or		BD Audio Mode	Mix Audio Output		BLU-RAY
or		BD Audio Mode	Mix Audio Output
		Digital Out	Bitstream
		Down Sampling	On
		DRC	Auto
	When the discs that are recorded in the Dolby				BLU-RAY
Auto	TrueHD format is in playback, this unit detects				SETTING
	DRC setting of the disc and set the DRC setting				SETTING


	of this unit to “On” or “Off” automatically.
On	Compress the range between soft and loud
On	sounds.				TROUBLESHOOTING
	sounds.
Off	No effects (original sound).
Off	No effects (original sound).
6 Press [SETUP] to exit.
					INFORMATION