Sylvania LD427SSX owner manual Control Panel, Terminals, Side Panel, Rear Panel

Español Français English

Control Panel			1.	B (play) (p. 38)
			2.	Press to begin the disc playback.
				C (stop) (p. 38)
			3.	Press to stop the disc playback.
	PLAY	1		A (eject) (p. 37)
				Press to eject the disc.
	STOP
		2	4.	VOLUME K/L (p. 16)
	EJECT
		3		Press to adjust the volume or move right (K) / left (L)
		4		through the main menu items.
	VOLUME	5	5.	SETUP V (p. 20)
	SETUP			Press to display the main menu.
			6.	CHANNEL K/L (p. 15 / p. 16)
	CHANNEL	6		Press to select channels or move up (K) / down (L)
	POWER	7		through the main menu items.
			7.	POWER y (p. 15)
				Press to turn the unit on and off.
			8.	disc loading slot (p. 37)
				Insert the disc with the label side facing forward.

89. infrared sensor window

9Receives infrared rays transmitted from the remote

10control.

1110. POWER indicator

12Lights up green when power is on.

11.STAND BY indicator

Lights up red when power is off.

Terminals		12. DISC indicator
		Lights up orange when the disc is inserted.
S-VIDEO	13	[Side Panel]
VIDEO		13. S-Video / Video / Audio Input jack for VIDEO 2 (p. 12)
AUDIO
L		S-Video, RCA video, RCA audio cable connection from
R
VIDEO 2		an external device.
		14. USB terminal (p. 14)
		Use this terminal only to play back MP3 / JPEG files
		stored in the USB flash memory, or when software
		update is needed.
		15. HDMI 2 Input jack (p. 10 / p. 11)
	14	HDMI connection from HDMI device.
USB		[Rear Panel]
16
17	15	16. AC power Inlet (p. 14)
18		Connect the supplied AC power cord for a standard AC
HDMI 2
	19	outlet.
		17. Cable management (p. 14)
		You can bundle the cables when you attach the
		supplied cable management tie here.
		18. Digital Audio Output jack (p. 13)
	20	Coaxial digital cable connection for a decoder or an
	21	audio receiver.
		19. Component Video and Audio Input jack (p. 10 / p. 12)
	22	RCA component video cable and RCA audio cable
	23	connection from an external device.
		20. S-Video / Video / Audio Input jack for VIDEO 1 (p. 12)
		S-Video, RCA video, RCA audio cable connection from
	24	an external device.
		21. Antenna Input jack (p. 10)
		RF coaxial cable connection for your antenna or cable TV signal.
	25	22. Audio Input jack for HDMI 1 (p. 11 / p. 13)
		RCA audio cable connection from a DVI device.
		When you connect your PC that has a DVI terminal,
		use a stereo mini plug-RCA conversion cable as well.
		(For HDMI 1 Input jack only)
Note for USB terminals:		23. Audio Output jack (p. 13)
• User should not connect any devices to the USB terminal such		RCA audio cable connection for an external device.
as digital camera, keyboard, mouse, etc. (because these will not		24. HDMI 1 Input jack (p. 10 / p. 11 / p. 13)
work).		HDMI connection for HDMI or DVI device.
• The software update is, in most cases, handled by an authorized		When you connect your PC that has a DVI terminal, you
service person or in some circumstances the user may be asked
		can enjoy this unit as a PC monitor.
to do the software upgrade themselves.
		25. HDMI 3 Input jack (p. 10 / p. 11)
		HDMI connection from HDMI device.	EN

INTRODUCTION PREPARATION WATCHING TV OPTIONAL SETTING OPERATING BLU-RAY BLU-RAY SETTING TROUBLESHOOTING INFORMATION

7